Signmaker Fluids: RAPIDtac

RAPIDTAC ORIGINAL (flesh pink colour), and
RAPIDTAC II (dark green colour) Application fluid

The quick and easy way to apply vinyl graphics wet.

Compared with soapy water, RAPIDTAC will significantly improve the adhesive bond.

Independent laboratory tests show 300% improvement in adhesion after 6 hours and 50% after 24 hours, with the final adhesion values over 10% higher. This increase in adhesion values, shortly after application, allows application tapes to be removed very quickly, resulting in shorter field visits.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Rapidtac original from RAPIDtac is for applying vinyl graphics wet which also improves the adhesive (flesh-pink colour fluid). Image shows the 3 x available bottle sizes (40oz, 30oz and 3.7L bottles).RAPIDTAC Original speeds up application times, eliminates bubbling and wrinkling, helps application in cold and hot weather and makes the final result look consistently professional, especially on glass.
» Material Safety Data Sheet.
» Prices and Fluid / Bottle Sizes.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Rapidtac 2 from RAPIDtac is for applying vinyl graphics wet which also improves the adhesive and works faster than original (dark green colour fluid). Image shows the 3 x available bottle sizes (40oz, 30oz and 3.7L bottles).RAPIDTAC II is the latest addition to the range and works twice as quickly as the original, as well as now working down to 0ºC.
» Material Safety Data Sheet.
» Prices and Fluid / Bottle Sizes.

- - - - - - - - - - - - - - - - - - - - - - - - -

INSTRUCTIONS FOR USE:
Stage One: Shake the bottle of RAPIDTAC well and using strips of masking tape, position the graphic image.
Stage Two: Lift the image and use RAPIDTAC sparingly to spray the substrate. Remove the liner from the film and place the self-adhesive image on the wet surface.
Stage Three: Finalise the position of the decal. Squeegee out the excess liquid, working from the centre outwards in all directions to enable the adhesive to start bonding. Wait 2-3 minutes.
Stage Four: Spray the RAPIDTAC fluid directly onto the application tape, then remove the tape slowly, pulling diagonally. Wipe over the surface with a paper towel.

 

Available sizes: 2.02oz (60ml) full bottle with sprayer, 32oz (946ml) bottle with sprayer,
and 1 US Gallon (3.7L) refil bottles in boxes of 4, or in singles.
RAPIDtac empty spray bottle with the nozzle. RAPIDTAC spray nozzle is shown in picture.

 

Also available: RAPIDTAC empty spray bottle - 32oz (946ml) with spray nozzle.

 

 


For the complete list of our Removal, Cleaning and Application Fluids select the 'Signmakers Fluids' link from the navigation menu on your left, or use the links below to skip to the individual products within this category:

RAPIDREMOVER Adhesive remover - Quick and easy way to remove old adhesive residue without damage.

RAPIDPREP Cleaning fluid - The quick and easy way to clean and degrease, in preparation for vinyl graphics from RAPIDtac.

Avery Dennison 3D Surface Cleaner - The quick and easy way to clean and degrease, in preparation for vinyl graphic applications over 3D surfaces, from Avery Dennison.

Avery Dennison Flat Surface Cleaner - An effective choice of cleaning fluid for removing day-to-day dirt from substrates during first pass cleaning in preparation prior to applying adhesive vinyls, from Avery Dennison.

RAPIDTAC ORIGINAL Application fluid - Speeds up application times, eliminates bubbling and wrinkling, helps application in cold and hot weather and makes the final result look consistently professional, especially on glass.

RAPIDTAC II Application fluid - is the latest addition to the range and works twice as quickly as the original, as well as now working down to 0ºC.

RAPIDTAC 32oz / 946ml empty spray bottle with nozzle - Empty bottles with spray nozzle and instructions for RAPIDREMOVER, RAPIDPREP, RAPIDTAC ORIGINAL, RAPIDTAC II and RAPIDCLEAR.