< PreviousGeneral Information: A complete range of 50µ highly conformable cast vinyls with an outdoor durability of 7-10 years. Designed for complex and full 3D vinyl wraps and with repositionable permanent grey coverall adhesives that are easy to position during application. MPI 1000 range is recommended for applications on rivets and corrugations. All the products are fire rated. Tech Spec: • SOLVENT, LATEX and UV printable • 3D Cast • Fire rated EN13501-1 MPI 1000 CAST SERIES PRINT MEDIA WRAPPING LONG TERM MPI 1104 EA MPI 1104 EA is an opaque gloss white 3D cast wrap film featuring Avery Dennison’s Easy ApplyTM Technology to ensure entrapped air can easily be rubbed out without the need to puncture the film. MPI 1105 EA RS Avery Dennison’s top of the range digital cast wrapping film with best-in-class 3D conformability for the most demanding private vehicle and commercial fleet wraps. MPI 1105 EA RS features Easy Apply RS™ adhesive technology with air-egress, repositionability and slideability making it our quickest and easiest film to fit. This is the same adhesive system that is used on Avery Dennison’s Supreme Wrapping Film range. MPI 1106 HT Avery Dennison’s High Tack digital cast wrapping film with best-in-class 3D conformability for the most demanding surfaces. MPI 1106 HT is designed specifically for low energy substrates or difficult surfaces. Tech Spec: • External life of 7 years • ‘EA’ easy-apply, ‘air-free’ type adhesive • Widths of 1370mm and 1520mm • Available in standard roll lengths of 25M, 50M and ‘buy the metre’ Tech Spec: • External life of 10 years • ‘EA RS’ easy-apply, repositionable and slideable adhesive • Widths of 1370mm and 1520mm • Available in standard roll lengths of 25M, 50M and ‘buy the metre’ Tech Spec: • External life of 7 years • Opaque grey solvent high tack permanent acrylic adhesive • Width of 1370mm • Available in standard roll lengths of 25M and ‘buy the metre’ 89General Information: A range of vinyls and polyester films for use on glass surfaces and illuminated signs. JT 5000 GLASS DECOR SERIES PRINT MEDIA WINDOWS & BACKLIT JT 8700 CG-RT Now uprated to 4 years outdoors, a 75µ gloss clear monomeric vinyl with a removable adhesive that can be removed cleanly from most surfaces within 2 years of application. Suitable for wet application, the adhesive will not ‘milk’ when wet applied. JT 9700 CG-BFT 80µ gloss clear polymeric with a repositionable permanent ‘bubble-free’ adhesive for quick and easy application to glass and other smooth surfaces. JT 9700 WT-PT 80µ mattwhite translucent polymeric vinyl with a permanent clear solvent adhesive. For illuminated signage applications. Tech Spec: • 1.5D monomeric • External life of 4 years • Solvent removable acrylic adhesive • 140gsm backprinted kraft liner • Fire rated EN13501-1 and BS 476 Class 0 • Widths of 1370mm and 1524mm • Available in standard roll lengths of 50M and ‘buy the metre’ Tech Spec: • SOLVENT, LATEX and UV printable Tech Spec: • 2D polymeric • External life of 5 years • ‘Bubble-free’ solvent permanent repositionable adhesive • 130gsm backprinted PE liner • Fire rated EN13501-1 • Width of 1370mm • Available in standard roll lengths of 50M and ‘buy the metre’ Tech Spec: • 2D polymeric • External life of 7 years • Solvent permanent acrylic adhesive • 130gsm backprinted PE liner • Fire rated EN13501-1 • Width of 1370mm • Available in standard roll lengths of 50M and ‘buy the metre’ 90PRINT MEDIA WINDOWS & BACKLIT JT 9700 WT-BFT FROSTED 80µ mattfrosted polymeric etch glass vinyl with a repositionable permanent ‘bubble-free’ adhesive for quick and easy application to glass and other smooth surfaces. JT 9700 WT-BFT DUSTED 80µ mattdusted polymeric etch glass vinyl with a repositionable permanent ‘bubble- free’ adhesive for quick and easy application to glass and other smooth surfaces. Tech Spec: • 2D polymeric • External life of 5 years • ‘Bubble-free’ solvent permanent repositionable adhesive • 130gsm backprinted PE liner • Width of 1370mm • Available in standard roll lengths of 25M and ‘buy the metre’ Tech Spec: • 2D polymeric • External life of 5 years • ‘Bubble-free’ permanent repositionable adhesive • 130gsm backprinted PE liner • Width of 1370mm • Available in standard roll lengths of 25M and ‘buy the metre’ 91General Information: Avery Dennison SF 100 Ultra clear removable is an ultra transparent film featuring a printable polyester face and an adhesive that will remove cleanly from most surfaces up to 1 year after application. It is ideal for applications such as printed window graphics or decorative decals that require a removable ultra transparent film. The SF 100 series uses a super clear film and adhesive combination that allows full window coverage so the unprinted area maintains glass clarity without the need to contour cut around the image. Tech Spec: • LATEX and UV printable • 1D polyester • External life of 2 years • Acrylic removable adhesive • Clear PET liner • Fire rated EN13501-1 • Width of 1370mm • Available in standard roll lengths of 50M and ‘buy the metre’ • Non PVC product SF 100 ULTRA CLEAR PET PRINT MEDIA WINDOWS & BACKLIT 92General Information: A range of self-adhesive films for use mainly on glass surfaces, including ultra-clear PVC and PET films. DIGIPRINT SPECIALITY WINDOW SERIES PRINT MEDIA WINDOWS & BACKLIT DS3045 100µ single-sided blockout gloss white PVC film with a black high opaque permanent solvent based adhesive. Economic single-sided blockout vinyl with high levels of opacity. Moisture stable, stay flat double-sided PE release liner for increased stability in printing. DS3047 210µ double-sided gloss white blockout monomeric film with a clear permanent adhesive. This is a double-sided blockout gloss white vinyl with a black blockout layer built in. Ideal for window graphics where no show-through of the printed image is required, even in direct sunlight. Can be used for double-sided graphics with reverse printed clear vinyls. DS3049 210µ double-sided gloss white blockout monomeric film with a clear removable adhesive. This is a double-sided blockout gloss white vinyl with a black blockout layer built in. Ideal for window graphics where no show-through of the printed image is required, even in direct sunlight. Can be used for double-sided graphics with reverse printed clear vinyls. Tech Spec: • SOLVENT, LATEX and UV printable • 1.5D monomeric • External life of 3 years • Opaque black solvent permanent acrylic adhesive • 120gsm double-side PE coated liner • Widths of 1370mm and 1524mm • Available in standard roll lengths of 50M and ‘buy the metre’ Tech Spec: • SOLVENT, LATEX and UV printable • 1.5D monomeric • External life of 3 years • Solvent permanent acrylic adhesive • 120gsm double-side PE coated liner • Widths of 1370mm and 1524mm • Available in standard roll lengths of 30M and ‘buy the metre’ Tech Spec: • SOLVENT, LATEX and UV printable • 1.5D monomeric • External life of 3 years • Solvent removable acrylic adhesive • 120gsm double-side PE coated liner • Widths of 1370mm and 1524mm • Available in standard roll lengths of 50M and ‘buy the metre’ 93PRINT MEDIA WINDOWS & BACKLIT DS3054 R 80µ ultra clear gloss monomeric Class 0 fire rated PVC with a removable adhesive for windows on a mattclear PET liner for ultimate clarity. A good alternative to clear polyester films for applications on glass. Our clearest vinyl for windows with a clarity that rivals polyester. Easy to print, handle and quicker to dry than polyester with a clear removable solvent acrylic adhesive for non-milking wet application to windows over a range of temperatures. For high quality window graphics where a ‘no vinyl’ look is preferred. Can also be printed reverse so can be applied internally for external viewing. Supplied with a mattclear PET liner to allow job monitoring while printing with white ink and also for increased clarity on windows. DS3054 P 80µ ultra clear gloss monomeric Class 0 fire rated PVC but with a permanent adhesive for windows, on a mattclear PET liner for ultimate clarity. A good alternative to clear polyester films for applications on glass. Our clearest vinyl for windows with a clarity that rivals polyester. Easy to print, handle and quicker to dry than polyester with a clear permanent solvent acrylic adhesive for non-milking wet application to windows over a range of temperatures. For high quality window graphics where a ‘no vinyl’ look is preferred. Can also be printed reverse so can be applied internally for external viewing. Supplied with a mattclear PET liner to allow job monitoring while printing with white ink and also for increased clarity on windows. Tech Spec: • SOLVENT, LATEX and UV printable • 1.5D monomeric • External life of 3 years • Solvent removable acrylic adhesive • Mattclear PET liner • Fire rated BS 476 Class 0 • Width of 1524mm • Available in standard roll lengths of 30M and ‘buy the metre’ Tech Spec: • SOLVENT, LATEX and UV printable • 1.5D monomeric • External life of 3 years • Solvent permanent acrylic adhesive • Mattclear PET liner • Fire rated BS 476 Class 0 • Width of 1524mm • Available in standard roll lengths of 30M and ‘buy the metre’ 94PRINT MEDIA WINDOWS & BACKLIT DS1000 CRYSTAL 50µ crystal clear gloss polyester with a permanent adhesive for windows. On a clear PET liner for ultimate clarity on internal faces of glass. DS1000 has an expected life of 5 years when applied to the inside of glass. Ultra transparent and scratch resistant top-coated PET film features a UV printable polyester face that is ideal for applications such as printed window graphics or decorative decals that require a ‘no film’ appearance so the unprinted area maintains glass clear without the need to contour cut around the image. The hard top-coat also helps resist scratching of the graphic in application. For UV printing only. Tech Spec: • UV printable • 1D polyester • Internal life of 5 years • Solvent permanent acrylic adhesive • Clear PET liner • Width of 1560mm • Available in standard roll lengths of 50M and ‘buy the metre’ 95General Information: Cling2 static self-cling PVC is ideal for internal prints on smooth surfaces. Made in the UK, the highly plasticised film will adhere to any smooth surface such as glass or painted metal, with no adhesive residue when the printed graphic is removed. Wet application is recommended as it will give a better seal to the substrate, eliminating air bubbles. Tech Spec: • SOLVENT, LATEX, UV, SCREEN and OFFSET printable • 1D monomeric • 190gsm PE coated liner • Width of 1370mm • Available in standard roll lengths of 25M, 50M and ‘buy the metre’ • Made in the UK STATIC CLING PRINT MEDIA WINDOWS & BACKLIT CLING2 S11-Z WHITE 150µ gloss white static self-cling PVC on a heat stable PE liner. CLING2 S21-Z CLEAR 150µ gloss clear static self-cling PVC on a heat stable PE liner. The clarity on the clear film is better than any others we have seen, allowing the clear film to disappear when applied correctly to a window. Cling2 S21-Z Clear is generally printed in reverse. The product can be backed up with a thin white self-adhesive PVC or white ink to add punch to the image. 96General Information: Two ‘easy to apply’ polyester films in white or clear with silicone adhesive that is ideal for applications onto windows and other smooth surfaces. These repositionable and removable films don’t leave any adhesive residue and offer high resolution image quality with an outstanding colour spectrum. Used mainly for internal window decorations on glass, but can also be used for selective external applications on glass for 18 to 24 months. Tech Spec: • SOLVENT, LATEX and UV printable • 1D monomeric • External life of 18-24 months in selective areas • Silcone repositionable and removable adhesive • Polyester liner • Width of 1370mm • Available in standard roll lengths of 30M and ‘buy the metre’ • Non PVC product CLINGSIL PRINT MEDIA WINDOWS & BACKLIT CLINGSIL WHITE CSW130 A 100µ mattwhite ‘easy to apply’ polyester print film with silicone adhesive for indoor window decoration. CLINGSIL CLEAR CSC130 An ‘easy to apply’ 100µ ultra-clear gloss transparent polyester print film with silicone adhesive for indoor window decoration. The optical clarity on this film is excellent, allowing the clear film to virtually disappear when applied correctly to windows. ClingSIL Clear is suitable for printing in reverse for viewing through the film. The product can be printed with white ink or backed up with a white self-adhesive film to add punch to the image. 97General Information: ‘One-way vision’ vinyls for windows. A couple of perforated vinyls with different hole ratios and for different printer technologies. Tech Spec: • SOLVENT, LATEX and UV printable • 1D • External life of 1 year • Acrylic semi-permanent adhesive ONE-WAY VISION PRINT MEDIA WINDOWS & BACKLIT JT 7300 WG-PB 40 JT 7300 WG-PB 40 is a fire rated 180µ white perforated monomeric with 1.6mm holes, a black reverse side and a semi-permanent adhesive. It features a film liner for Latex, UV and Solvent printing. Vinyl to hole ratio is 60:40 making it better for mid range viewing. Recommended optically clear gloss laminate is LUV 7036 polyester. JT 7300 WG-PB 30 JT 7300 WG-PB 30 is a 180µ white perforated monomeric with 1.5mm holes, a black reverse side and a semi-permanent adhesive and solid liner. Vinyl to hole ratio is 70:30 making it better for close range viewing. Recommended optically clear gloss laminate is LUV 7036 polyester. Tech Spec: • Paper / PP hybrid liner • Fire rated EN13501-1 • Widths of 1370mm and 1520mm • Available in standard roll lengths of 10M, 50M and ‘buy the metre’ Tech Spec: • 135gsm backprinted PE coated liner • Width of 1370mm • Available in standard roll lengths of 50M and ‘buy the metre’ 98Next >