< PreviousM63-W-X FROSTED EFFECT Fire rated, 75µ monomeric film that features an airXit clear medium tack WindowPLUS permanent adhesive on a polyethylene coated liner. The structured liner and adhesive system speeds up application times and helps to eliminate air bubbles. M63-W-X blocks over 65% of harmful UVa light. Very good stability and light transmission, good privacy and UV block. P65-W-P SILVER CRYSTAL 75µ polymeric film that features WindowPLUS permanent adhesive. This adhesive builds bonds fast, even at temperatures close to 0˚C the adhesive will get to normal levels within 5 minutes. P65-W-P blocks over 65% of harmful UVa light. Very good stability and light transmission, good privacy and UV block. P65-W-X SILVER CRYSTAL 75µ polymeric film that features an airXit clear medium tack WindowPLUS permanent adhesive on a polyethylene coated liner. The structured liner and adhesive system speeds up application times and helps to eliminate air bubbles. P65-W-X blocks over 65% of harmful UVa light. Very good stability and light transmission, good privacy and UV block. Tech Spec: • 1D monomeric • 1 frosted colour • External life of 4-5 years • airXit medium tack permanent adhesive • 160gsm micro-embossed PE coated liner • Fire rated EN13501-1 • Widths of 615mm and 1230mm Tech Spec: • 2D polymeric • 1 silver crystal colour • External life of 5 years • Permanent clear UV polyacrylate adhesive • 140gsm PE coated liner • Widths of 615mm, 1230mm and 1600mm Tech Spec: • 2D polymeric • 1 silver crystal colour • External life of 5 years • airXit medium tack permanent adhesive • 160gsm micro-embossed PE coated liner • Widths of 615mm and 1230mm SIGN MEDIA WINDOWS & BACKLIT 29598-03 FROSTED A new lower cost 75µ polymeric frosted finish translucent vinyl from Mactac, designed for indoor and outdoor decoration of windows. Excellent stability, good light transmission, good privacy and an excellent UV block. 798-01 FROSTED 20 years of trouble-free actual field experience and a permanent adhesive that can be removed more easily than the competition. Excellent stability, very good light transmission, excellent privacy and very good UV block. 798-01 BF FROSTED The same 80µ glass etch film as 798-01 but with a bubble-free micro-embossed repositionable clear solvent based acrylic adhesive, allowing the film to be easily applied dry. Very good stability and light transmission, excellent privacy and a good UV block. Tech Spec: • 135gsm backprinted kraft liner • Widths of 615mm, 1230mm and 1524mm • APS ‘Galaxy’ product codes - APS: 598-03 Tech Spec: • 135gsm backprinted kraft liner • Widths of 615mm, 1230mm and 1524mm • APS ‘Galaxy’ product codes - APS: 798-01 Tech Spec: • 145gsm micro-embossed backprinted PE liner • Widths of 615mm and 1230mm • APS ‘Galaxy’ product codes - APS: 798-01 BF SIGN MEDIA WINDOWS & BACKLIT General Information: A complete range of decorative glass etch films in a wide variety of shades and finishes. Tech Spec: • 2D polymeric • 9 different finishes and shades • External life of 5 years • Solvent permanent acrylic adhesive • Fire rated EN13501-1 • Available in standard roll lengths of 10M, 25M, 50M and ‘buy the metre’ GLASS DÉCOR POLYMERIC WINDOW FILMS 798-02 DUSTED 20 years of trouble-free actual field experience and a permanent adhesive that can be removed more easily than the competition. Excellent stability and light transmission, excellent privacy and good UV block. Tech Spec: • 135gsm backprinted kraft liner • Widths of 615mm, 1230mm and 1524mm • APS ‘Galaxy’ product codes - APS: 798-02 30700 TINTS 80µ coloured mattglass etch films with a permanent adhesive. Very good stability, good light transmission, excellent privacy and very good UV block. Tech Spec: • 135gsm backprinted kraft liner • 5 unique tints • Widths of 615mm and 1230mm • APS ‘Galaxy’ product codes - APS: 7X8-00 SIGN MEDIA WINDOWS & BACKLIT 31SIGN MEDIA WINDOWS & BACKLIT AVERY CRYSTAL An 80µ glass etch film with a permanent adhesive. Excellent stability, very good light transmission, excellent privacy and very good UV block. AVERY DUSTED An 80µ glass etch film with a permanent adhesive. Excellent stability, light transmission and privacy with a good UV block. Tech Spec: • APS ‘Galaxy’ product codes - APS: Avery Crystal Tech Spec: • APS ‘Galaxy’ product codes - APS: Avery Dusted General Information: Two 80µ polymeric etch vinyls, with permanent solvent acrylic based adhesives for wet application that can be cleanly removed from glass at the end of sign life. For decorative window applications as well as onto doors and mirrors. Tech Spec: • 2D polymeric • 2 different finishes • External life of 5 years • Solvent permanent acrylic adhesive • 125gsm backprinted kraft liner • Fire rated EN13501-1 • Widths of 615mm and 1230mm • Available in standard roll lengths of 10M, 25M, 50M and ‘buy the metre’ DECORATIVE WINDOW FILMS 32General Information: Both eye-catching and economic, it features a heavily flaked calendered PVC film to imitate a sandblasted finish and have real sparkle at various viewing angles making window graphics really come to life. The solvent acrylic permanent adhesive can be applied wet with no adhesive milking and the release liner is coloured yellow to make weeding easier. OC100 is best viewed through the adhesive side making it ideal for application to the inside of windows when it will be viewed from the street. It also retains its sparkle under a wide range of lighting and viewing angles. Very good stability, light transmission and privacy with a good UV block. Tech Spec: • 1.5D monomeric • External life of 3 years • Solvent permanent acrylic adhesive • 80gsm single-side yellow PE coated liner • Widths of 615mm and 1230mm • Available in standard roll lengths of 10M, 25M, 50M and ‘buy the metre’ • APS ‘Galaxy’ product codes - APS: OC100 OC100 OPAL CRYSTAL SIGN MEDIA WINDOWS & BACKLIT 33SIGN MEDIA WINDOWS & BACKLIT ARCHITECTURAL WINDOW FILMS General Information: Three fire rated polyester based films to enhance the performance of flat glazing units. All feature permanent solvent acrylic based adhesives for wet application and are recommended for internal use only. Tech Spec: • 1D polyester • 3 different finishes • Internal use • Solvent permanent acrylic adhesive • Clear PET liner • Fire rated EN13501-1 • Non PVC product R SILVER 20 i SOLAR CONTROL R Silver 20 i Solar Control is a fire rated 50µ silver solar film for flat-sided window applications such as office windows. By rejecting excess solar radiation, R Silver films cut heat build-up through the glazing. The film incorporates a tough scratch resistant coating which aids installation and maintenance whilst increasing the life of the film. This product blocks over 99% of UV light, is fire rated, and is designed to last 12 years internally when professionally installed. R Silver 20 i can also act as a privacy film under the correct lighting conditions. We would recommend using a special window film squeegee such as our GT020 Unger snappable to make application easier. Tech Spec: • Widths of 914mm, 1220mm and 1524mm • Available in standard roll lengths of 10M, 31M and ‘buy the metre’ • APS ‘Galaxy’ product codes - APS: R Silver 20 34DR GREY 15 i The DR black-grey PET window film combines a reflective outer layer for high solar energy rejection with a less reflective inner layer to preserve the view outside and maintain indoor ambiance. It delivers high levels of protection from solar heat and cuts energy costs by reducing the need for air conditioning. DR Grey 15 i black-grey is ideal for commercial and residential energy-upgrade glazing projects when the customer demands quick payback but wants a neutral interior that preserves the view outside. This product blocks over 99% of UV light, is fire rated, and is designed to last 12 years internally when professionally installed. We would recommend using a special window film squeegee such as our GT020 Unger snappable to make application easier. SF 8i BOMB BLAST SF 8i Bomb Blast is a fire rated 200µ optically clear polyester film for flat-sided window applications such as office windows. It is certified to GSA Level C “3B” which is recommended for government and public buildings. SF 8i offers a high level of protection against impact, blast, crime or natural disaster. SF 8i supports building codes and insurance policies that demand glazing meeting certain safety standards such as impact- resistant glass in schools, and protection against break-ins or blast protection at retail locations. The film incorporates a tough scratch resistant coating which aids installation and maintenance whilst increasing the life of the film. This product blocks over 99% of UV light. We would recommend using a special window film squeegee such as our GT020 Unger snappable to make application easier. Tech Spec: • Width of 1524mm • Available in standard roll lengths of 31M and ‘buy the metre’ Tech Spec: • Width of 1524mm • Available in standard roll lengths of 31M and ‘buy the metre’ SIGN MEDIA WINDOWS & BACKLIT 35General Information: A glossy 80µ range of calendered coloured transparent films. The colours can be layered to create eye-catching window displays. Tech Spec: • 1.5D monomeric • 10 gloss transparent colours • External life of 3 years for all the colours • Solvent permanent acrylic adhesive • 140gsm backprinted kraft liner • Fire rated EN13501-1 • Widths of 615mm and 1230mm • Available in standard roll lengths of 10M, 25M, 50M and ‘buy the metre’ • APS ‘Galaxy’ product codes - APS: 84XX-XX SIGN MEDIA WINDOWS & BACKLIT MACCRYSTAL 8400 SERIES TRANSPARENTS 36General Information: The outstanding uniformity of light transmission makes this product ideal for both light boxes and window graphics. 80µ mattpolymeric translucent film is compatible with all the common illuminated substrates, i.e. acrylic, glass and most flexible faced materials. Tech Spec: • 2D polymeric • 34 mattcolours • External life of 5-7 years for all the colours • Solvent permanent acrylic adhesive • 135gsm backprinted kraft liner • Fire rated EN13501-1 • Widths of 615mm and 1230mm • Available in standard roll lengths of 10M, 25M, 50M and ‘buy the metre’ • APS ‘Galaxy’ product codes - APS: 97XX.XX 9700 SERIES POLYMERIC TRANSLUCENTS 9722.00 POLYMERIC LIGHT STOP This 140µ mattwhite film has a black adhesive and is 100% opaque so can be used to create special effects on light boxes, e.g. hidden messages only visible when the sign is illuminated. This will also have the effect of adding punch to the parts of the sign not backed with Light Stop. 9700 SERIES POLYMERIC LIGHT DIFFUSERS Two different light diffusing films for illuminated work. 9798-30 is more opaque allowing 30% of light to pass through, while 9798-60 allows 60%, or twice as much, light through the film. Tech Spec: • 1D polymeric • External life of 7 years • Solvent permanent acrylic adhesive • 135gsm backprinted kraft liner • Width of 1230mm • Available in standard roll lengths of 10M, 25M, 50M and ‘buy the metre’ • APS ‘Galaxy’ product codes - APS: 9722.00 Tech Spec: • 1D polymeric • 2 mattdiffusers • External life of 5-7 years • Solvent permanent acrylic adhesive • 135gsm backprinted kraft liner • Width of 1230mm • Available in standard roll lengths of 10M, 25M, 50M and ‘buy the metre’ • APS ‘Galaxy’ product codes - APS: 9798.XX SIGN MEDIA WINDOWS & BACKLIT 37General Information: Dichroic polyester window films with a removable adhesive that change colour depending on your viewing angle as you walk past. These stunning, transparent iridescent films bring glass to life with colours changing from every angle. 100µ polyester films that can be printed UV. Tech Spec: • UV printable • 1D polyester • 2 gloss transparent colours • External life of 1 year • Solvent removable acrylic adhesive • Clear PET liner • Width of 1370mm • Available in standard roll lengths of 10M, 25M and ‘buy the metre’ • Non PVC product DICHROIC FILMS SIGN MEDIA WINDOWS & BACKLIT BD100 FREEZE Blue tinted dichroic film. RD100 FIRE Red tinted dichroic film. 38Next >