North: 01709 829800

South: 01753 696977

E: sales@allprint.co.uk

Sign Media

Print Media

Finishing Media

Fabric Media and Accessories

Solvent Inks

Screen Print Media

Tools and Accessories

Nearly all the products in our print finishing range can be purchased ‘buy the metre’ allowing you to buy only what you need for specific jobs, especially important for the higher value and specialised laminates.

Our range of easy to use, tried and tested soft signage print fabrics are suitable for UV, Solvent, Latex and Dye-sublimation printers. We also offer the ancillaries you need to produce display frames, lightboxes, flags and banners.

A range of pressure-sensitive Screen Print Media available in sheets and rolls that are suitable for most common screen printing inks used for self-adhesive films – For applications onto flat-sides these outdoor films offer excellent conversion and printing characteristics, plus outstanding stability.

JT 8300 WM-RT Dot Floors

Print media: Architectural & Flooring

200µ matt white vinyl for ‘one-part’ printed floor graphics (does not need lamination) for Solvent, Latex and UV inks. Mactac’s ‘Dot’ adhesive allows for easy installation without using specialist tools or water. 1 month indoor life for pedestrian traffic and slip rated with a Pendulum Test Value of greater than 36, which is low slip potential.

Product Details

SOLVENT, LATEX and UV
1D
Internal life of 1 month
‘DOT’ removable transparent acrylic adhesive
120gsm backprinted kraft liner
Fire rated EN13501-1
Width of 1370mm
Available in standard roll lengths of 25M and ‘buy the metre’
Slip rated EN13036-4 PTV rated 36+

APS product code: JT 8300 WM-RT Dot Floors

Description

JT 8300 WM-RT Dot Floors is for ‘one-part’ printable floor graphics and has Mactac’s ‘Dot’ adhesive for easy installation.

JT 8300 WM-RT Dot Floors is a 200µ ‘one-part’ white matt vinyl with Mactac’s ‘Dot’ adhesive that makes the film easy to install as no specialist tools or water are needed during application, with good adhesion on smooth surfaces.

1 month indoor life for pedestrian traffic.

Slip rated with a Pendulum Test Value of greater than 36, which is low slip potential.

JT 8300 WM-RT Dot Floors should not be laminated.

For printing of floor graphics we also offer Mactac Streetrap floor print vinyl which is slip resistant when laminated to either Mactac’s FloorGrip or StreetLam.

For a general summary of Slip Ratings for floor graphic products read our Summary Of Slip Ratings article.