< PreviousGeneral Information: StreetRap is a durable, printable vinyl for longer-term flooring campaigns. 85µ white mattvinyl with a very aggressive permanent adhesive and a 3 month outdoor life for pedestrian traffic when laminated with FloorGrip. 6 months outdoors can be achieved by laminating with StreetLam. StreetRap was designed for application to slightly rough pedestrian surfaces like concrete and asphalt and is intended for external applications only. Recommended laminates: Either Mactac’s FloorGrip or Mactac’s StreetLam can be added dependent on the application. Tech Spec: • SOLVENT, LATEX and UV printable • 1D • External life of 3-6 months • Solvent permanent high tack acrylic adhesive • 150gsm backprinted PE coated liner • Fire rated EN13501-1 • Width of 1370mm • Available in standard roll lengths of 25M and ‘buy the metre’ STREETRAP PRINT MEDIA EXTERNAL FLOORING For more demanding applications on rougher surfaces. Currently our tackiest and strongest adhesive for the widest range of difficult applications. The high coat weight adhesive is ideal for rough external surfaces such as concrete, bricks, asphalt, tarmac etc. as the adhesive will flow in to the valleys increasing the adhesive contact area. Manufactured in the UK and with outstanding performance. Fire rated to EN13501-1 and BS 476 Class 0. M15-M-P 80µ mattwhite monomeric with a clear MaxGRAB permanent adhesive on a PE liner. For flooring applications the durability is 3 to 6 months. Tech Spec: • SOLVENT, LATEX and UV printable • 1.5D monomeric • External life of 3-6 months • Max-grab permanent clear UV polyacrylate adhesive • 140gsm backprinted PE coated liner • Fire rated EN13501-1 and BS 476 Class 0 • Width of 1370mm • Available in standard roll lengths of 25M and ‘buy the metre’ • Made in the UK NU-PRINT ‘M’ MONOMERIC MAXGRAB 119General Information: A range of laminated and coated frontlit scrim and mesh banners that will satisfy most needs. Wound print side facing out. EF440 A 440gsm economy smooth mattscrim PVC banner. This laminated frontlit scrim banner is available in a bright white finish with a backing that can be taped with our Bannerbond GM740 double-sided tape, welded or stitched. A medium strength banner with a tensile strength of 645/732 N/5cm and with a tear strength of 63/48 N so may not be suitable for across-the-street applications with large sail areas. For these type of applications where wind resistance is a major issue we would recommend our strongest banner, PF550. EF500 A 500gsm economy smooth mattscrim laminated frontlit PVC banner in a nice neutral white shade. It offers great value for money and has the smoothest face of all our laminated scrim banners. It can be taped with our Bannerbond GM740 double-sided tape, welded or stitched. EF500 is a medium strength banner with a tensile strength of 645/732 N/5cm and with a tear strength of 105/194 N so may not be suitable for across-the-street applications with large sail areas. For these type of applications where wind resistance is a major issue we would recommend our strongest banner, PF550. Tech Spec: • SOLVENT, LATEX and UV printable • Widths of 1100mm, 1370mm and 1600mm • Available in standard roll lengths of 30M and ‘buy the metre’ Tech Spec: • SOLVENT, LATEX and UV printable • Widths of 1100mm, 1370mm and 1600mm • Available in standard roll lengths of 30M and ‘buy the metre’ FRONTLIT SCRIM & MESH BANNERS PRINT MEDIA BANNERS & MESH 120PRINT MEDIA BANNERS & MESH PF550 A 550gsm coated and fire rated smooth mattscrim PVC banner. If you are looking for a banner that hangs flat and is both strong and smooth then PF550 is the product to look at. This coated frontlit scrim PVC banner can be taped with our Bannerbond GM740 double-sided taped, welded or stitched. It is a brilliant white shade and is the strongest banner in our range. The tensile strength is 2,500/2,500 N/5cm and tear strength is 250/250 N. The scrim pattern is very tight which makes the surface very smooth to print on whilst retaining its strength. Print quality is superb and this coated banner hangs flatter than any of the other scrim reinforced banners in our range. MESH300 B1 fire rated. This 300gsm mesh has an easy to remove release liner that allows the product to be printed on all digital printers. The 25% hole to 75% film configuration helps make this mesh better for longer viewing distances. This warp knitted fabric has a high tensile strength of 1,658/1,546 N/2.5cm and a high tear strength of 214/168 N. It can be welded or stitched. After printing leave to cool before removing the backing liner. Tech Spec: • SOLVENT, LATEX and UV printable • Fire rated DIN 4102-1 B1 • Widths of 1100mm, 1370mm and 1600mm • Available in standard roll lengths of 30M and ‘buy the metre’ Tech Spec: • SOLVENT, LATEX and UV printable • Fire rated DIN 4102-1 B1 • Widths of 1370mm and 1600mm • Available in standard roll lengths of 30M and ‘buy the metre’ 121PRINT MEDIA PAPERS General Information: 225gsm photo satin indoor paper. The base paper is sourced from certified managed forests. Tech Spec: • SOLVENT, LATEX and UV printable • Widths of 1372mm and 1524mm • Available in standard roll lengths of 30M and ‘buy the metre’ • Non PVC product TSSP225 122General Information: TriSolv Billboard Paper Plus is a 130gsm blue backed opaque satin outdoor poster paper designed to prevent show-through of previous posters. This cover-all paper has excellent wet strength properties and will typically last 2-3 months outdoors unlaminated. Our recommended DigiGUARD laminates will dramatically extend this life. Like the other poster papers, drying times may be slower than on a standard vinyl. Prints on this material should be soaked for up to 24 hours in water to avoid the prints from shrinking or swelling when in-situ. A standard or heavy-duty starch based paste may be used. We also stock a self-adhesive version of this called Sihl 3683. The base paper is sourced from certified managed forests. General Information: TriSolv PrimeArt is a 200gsm gloss outdoor poster paper and our best-selling and premium poster paper. With the highest most vibrant print quality, it can be used for internal applications that would once have been printed using a water based inkjet printer with the added bonus of superior water, scratch and fade resistance. A Solvent print on the above poster paper will typically last for 2-3 months outdoors unlaminated. Lamination will dramatically extend the image life. Drying times on the poster papers are sometimes slower than our self-adhesive vinyl so take care when handling straight after printing. Let the prints dry for at least a couple of hours before finishing them. A forced air dryer such as a fan heater can be used to speed up drying times if required. The base paper is sourced from certified managed forests. Tech Spec: • SOLVENT, LATEX, UV printable • Widths of 1372mm and 1600mm • Available in standard roll lengths of 61M and ‘buy the metre’ • Non PVC product Tech Spec: • SOLVENT, LATEX and UV printable • Widths of 1270mm, 1372mm and 1600mm • Available in standard roll lengths of 50M and ‘buy the metre’ • Non PVC product 3687 TRISOLV 3686 TRISOLV PRINT MEDIA PAPERS 123General Information: TriSolv Poster Paper Plus is a 130gsm satin white outdoor poster paper. It is a very opaque, barrier coated satin white poster paper that has excellent wet strength properties, which allow it to be used as an outdoor poster paper. Its resistance to temperature and humidity also allows it to be used in environments with high humidity and extreme temperature variations. A solvent print on the above poster paper will typically last for 2-3 months outdoors unlaminated. Lamination will dramatically extend the image life. Drying times on the poster papers are sometimes slower than our self-adhesive vinyl so take care when handling straight after printing. Let the prints dry for at least a couple of hours before finishing them. A forced air dryer such as a fan heater can be used to speed up drying times if required. The base paper is sourced from certified managed forests. Tech Spec: • SOLVENT, LATEX and UV printable • Widths of 1372mm and 1600mm • Available in standard roll lengths of 61M and ‘buy the metre’ • Non PVC product 3689 TRISOLV PRINT MEDIA PAPERS General Information: TriSolv PhotoArt is a 210gsm glossy outdoor poster paper offering brilliant colour reproduction, homogeneous gloss, and improved drying times. It features a water-repellent surface and has a high degree of stiffness. A solvent print on the above poster paper will typically last for 2-3 months outdoors unlaminated. Tech Spec: • SOLVENT, LATEX and UV printable • Width of 1372mm • Available in standard roll lengths of 45M and ‘buy the metre’ • Non PVC product 3699 TRISOLV 124General Information: A 280µ non-PVC thick mattwhite polyester fabric with an opaque silver/grey back light-stop for roll-up displays. The printed product hangs flat with minimum edge curl and has a scuff resistant surface. General Information: A 300µ textured white PVC/PET hybrid film with a dark grey light stop for roll-up displays. The printed product hangs flat with minimum edge curl and has a scuff resistant surface. Tech Spec: • SOLVENT, LATEX and UV printable • Width of 914mm • Available in standard roll lengths of 30M and ‘buy the metre’ • Profiled for HP Latex Inks • Non PVC product Tech Spec: • SOLVENT, LATEX and UV printable • Widths of 914mm, 1067mm, 1370mm and 1520mm • Available in standard roll lengths of 30M, 50M and ‘buy the metre’ • Made in the UK DISPLAYFAB DISPLAY301 PRINT MEDIA DISPLAY FILMS allprint.co.uk All Print Supplie s 125PRINT MEDIA DISPLAY FILMS General Information: A 500µ textured white PVC/PET hybrid film with a dark grey light stop for pop-up displays. The printed product hangs flat with minimum edge curl and has a scuff resistant surface. General Information: 170µ satin white PP film with a waterproof coating. This lightweight semi opaque film has a paper like appearance with excellent durability and tear resistance. Can be used for roll-ups and many other applications. Tech Spec: • SOLVENT and UV printable • Width of 914mm and 1067mm • Available in standard roll lengths of 30M and ‘buy the metre’ • Made in the UK Tech Spec: • SOLVENT, LATEX and UV printable • Width of 1372mm • Available in standard roll lengths of 40M and ‘buy the metre’ • Non PVC product DISPLAY501 3629 SYNTISOL 126General Information: B2 fire rated, a 320µ / 510gsm ultra smooth double-sided anti-curl block out PVC banner with white backing. It has a polyester layer encapsulated by PVC which gives the product a stiff feel and ensures it hangs flat with no edge curl to detract from the finished roll-up. It fits well into all banner stands and has a super smooth surface with good scuff resistance. For roll-up banner stands, we would recommend that the product is laid out flat to dry for around 4 hours to ensure that all solvents are evaporated. The panel can then be trimmed and inserted into the banner stand. This will ensure that the finished drop lies as flat as possible with this one piece solution. We cannot slit this product. General Information: 200µ satin white, ferrous printable PET film. Use our special combination of 0.55mm MAGNETIC self-adhesive wall magnet vinyl and FCP200 ferrous print vinyl to create mess-free, simple to place and replace ‘quick change’ interchangeable graphics for retail and Point Of Sale signs. This printable polyester film has a ferrous coating on the back side that adheres to a magnetic substrate. This allows a retail environment to have a permanent magnetic wall that can be updated with seasonal promotions by inexperienced fitters. Tech Spec: • SOLVENT and UV printable • Fire rated DIN 4102-1 B2 • Width of 914mm • Available in standard roll lengths of 50M and ‘buy the metre’ Tech Spec: • SOLVENT, LATEX and UV printable • Widths of 1372mm and 1600mm • Available in standard roll lengths of 50M, and ‘buy the metre’ V-FLAT DOUBLE 320 FCP200 PRINT MEDIA DISPLAY FILMS 127FABRIC MEDIA DISPLAY FABRICS General Information: Royal Majestic 1025-11 is a 220gsm woven fire rated 100% polyester display fabric canvas. It is both water-tight and air-tight, with good flatness. Available up to 3.2M wide, it is the ideal product for one-piece seamless wall graphics, as it is easy to paste, has good opacity and is robust to handle. There is no need for time consuming joints and very little waste is generated making it far quicker and easier to fit than a self-adhesive vinyl option. Also used for stretched canvas, art reproduction prints, roll-up displays and frontlit banners. This product can be cold cut or hot cut. General Information: Speedy 911-11 is a 180gsm woven fire rated polyester fabric for both frontlit and backlit tension display frames. For printing with Dye-dispersion, UV and Latex inks. It is a water-resistant, fire rated, crease- free, water-tight and air-tight fabric, and has good flatness. Speedy 911-11 may work on your Solvent printer if you self-test the media and are subsequently satisfied with your results. This product can be cold cut. For Dye-sublimation printing use the outside face of the roll. Tech Spec: • SOLVENT, LATEX and UV printable • Fire rated DIN 4102-1 B1 • Widths of 1550mm and 3200mm • Available in standard roll lengths of 50M and ‘buy the metre’ Tech Spec: • LATEX, UV and DYE-DISPERSION printable (for SOLVENT test first) • Fire rated DIN 4102-1 B1 • Widths of 1600mm and 3200mm • Available in standard roll lengths of 50M, 100M and ‘buy the metre’ ROYAL MAJESTIC 1025-11 SPEEDY 911-11 128Next >