< PreviousGeneral Information: Blackback Soft 1056-16 is a 240gsm woven black backed single-side coated 100% polyester fabric with a black backing. The black on the reverse gives maximum opacity but does not dull down the white print face, leaving the finished graphic vibrant and punchy. Available up to 3.2M wide, it can be used for suspended banners, displays, frontlit banners, blockout banners, roll-ups and stage sets. General Information: Picasso Canvas Prime Satin dries quickly and can be folded over frames without cracking. 1:1 weave polycotton blend with outstanding print quality. Ideal for long term internal projects whilst also offering better than normal water resistance. Lamination is not recommended. The canvas can become brittle below room temperature so if working in colder conditions then handle the product very carefully when stretching and folding over wooden frames. For internal use only. This product can be cold cut. Tech Spec: • SOLVENT, LATEX and UV printable • Fire rated DIN 4102-1 B1 • Widths of 1600mm, 2600mm and 3200mm • Available in standard roll lengths of 50M and ‘buy the metre’ Tech Spec: • SOLVENT, LATEX and UV printable • Widths of 914mm, 1372mm and 1524mm • Available in standard roll lengths of 15M and ‘buy the metre’ BLACKBACK SOFT 1056-16 3609 PICASSO FABRIC MEDIA DISPLAY FABRICS 129Nearly all these products in our print finishing range can be purchased ‘buy the metre’ allowing you to buy only what you need for specific jobs, especially important for the higher value and specialised laminates. This does not include the DigiMOUNT range of self wound mount films for practical reasons! As well as the DigiGUARD laminates and DigiMOUNT mounting films we have sold for years, we also offer the extensive range of Mactac, Avery Dennison and NU-COAT laminates. We have also recently introduced two excellent gloss and matt3D cast wrapping laminates from Fedrigoni. Our in-house application centre features a TS 1600 laminator to help us better understand the issues you face and ensure that all the products are thoroughly researched before release. INTRODUCTION Buy The MetreBuy The Metre Non-standard roll lengths are surcharged at 33% FINISHING MEDIA For technical advice or support on how to get the best out of our media, please contact our sales team: Phone: Southern Office: Tel: 01753 696977 Northern Office: Tel: 01709 829800 Email: sales@allprint.co.uk TECHNICAL ADVICE 130General Information: For customers looking for a non-PVC range of short-term laminates. The GUARDIAN Non-PVC Laminates range are engineered from 60µ polypropylene and are also suitable for UV inks. Available in both gloss and mattfinishes and wound face in. GUARDIAN LAM GLOSS A gloss 60µ non-PVC laminate for most print technologies including UV. GUARDIAN LAM MATT A matt60µ non-PVC laminate for most print technologies including UV. Tech Spec: • For SOLVENT, LATEX and UV prints • 1D polypropylene • External life of 1 year • Acrylic permanent adhesive • 65gsm glassine liner • Width of 1370mm • Available in standard roll lengths of 50M and ‘buy the metre’ • Non PVC product GUARDIAN NON-PVC LAMINATES FINISHING MEDIA FLAT SURFACES SHORT TERM 131FINISHING MEDIA FLAT SURFACES MID-TERM General Information: The best laminates for UV prints in our range. The photograde clear solvent acrylic adhesive guarantees a high bond with minimal silvering and bridging around heavily UV inked areas. Suitable for UV inks as well as Solvent, Aqueous and Latex inks means that the DigiGUARD UV laminates can be used universally. A range of 3-5 year outdoor life, 80µ colour neutral PVC pressure sensitive laminating films that will successfully block out up to 70% of UVa light, significantly extending the colourfastness of the finished print. GU4 GLOSS A gloss 80µ PVC laminate suitable for all inks including UV. Will successfully block out over 50% of UVa light, significantly extending the colourfastness of the finished print. MU4 MATT A matt100µ PVC laminate suitable for all inks including UV. Will successfully block out over 50% of UVa light, significantly extending the colourfastness of the finished print. SU3-70 SEMI-MATT A semi-matt80µ PVC laminate for UV prints. The photograde clear solvent acrylic adhesive guarantees a high bond with minimal silvering and bridging around heavily UV inked areas. Suitable for UV inks as well as Solvent, Aqueous and Latex inks. Will successfully block out 70% of UVa light, significantly extending the colourfastness of the finished print. Tech Spec: • For SOLVENT, LATEX, UV and AQUEOUS prints • 1D monomeric Tech Spec: • External life of 4 years • Acrylic permanent adhesive • 140gsm kraft liner • Self-extinguishing • Widths of 1370mm and 1600mm • Available in standard roll lengths of 50M and ‘buy the metre’ Tech Spec: • External life of 4 years • Acrylic permanent adhesive • 140gsm kraft liner • Self-extinguishing • Widths of 1370mm and 1600mm • Available in standard roll lengths of 50M and ‘buy the metre’ Tech Spec: • External life of 3-5 years • Solvent permanent acrylic adhesive • 80gsm single-side PE coated liner • Fire rated BS 476 Class 0 • Widths of 1350mm and 1560mm • Available in standard roll lengths of 50M, 100M and ‘buy the metre’ LAMINATES FOR UV 132FINISHING MEDIA FLAT SURFACES MID-TERM TU3-70 MATT TEXTURED A matttextured scratch resist 80µ PVC laminate for UV prints. The photograde clear solvent acrylic adhesive guarantees a high bond with minimal silvering and bridging around heavily UV inked areas. Suitable for UV inks as well as Solvent, Aqueous and Latex inks. Will successfully block out 70% of UVa light, significantly extending the colourfastness of the finished print. GU3-70 ULTRA GLOSS Our glossiest laminate for UV prints featuring an ultra glossy 80µ PVC face film. The photograde clear solvent acrylic adhesive guarantees a high bond with minimal silvering and bridging around heavily UV inked areas. Suitable for UV inks as well as Solvent, Aqueous and Latex inks. Will successfully block out 70% of UVa light, significantly extending the colourfastness of the finished print. Tech Spec: • External life of 3-5 years • Solvent permanent acrylic adhesive • 80gsm single-side PE coated liner • Fire rated BS 476 Class 0 • Widths of 1350mm and 1560mm • Available in standard roll lengths of 50M, 100M and ‘buy the metre’ Tech Spec: • External life of 3-5 years • Solvent permanent acrylic adhesive • 80gsm single-side PE coated liner • Fire rated BS 476 Class 0 • Widths of 1350mm and 1560mm • Available in standard roll lengths of 50M, 100M and ‘buy the metre’ 133FINISHING MEDIA FLAT SURFACES MID-TERM General Information: A complete range of monomeric pressure sensitive laminates that cover short to mid term flat-sided applications. Products with ‘UV’ have improved adhesion to digital UV prints. Additionally, LF 8510 CS PP provides a PVC-free option. LF 8500 CM Mactac LF 8500 CM is their most economical mattlaminate. A matched laminate for the JT 8500 Series of print films. LF 8500 CG Mactac LF 8500 CG is their most economical gloss laminate. A matched laminate for the JT 8500 Series of print films. LF 8510 CS PP Mactac LF 8510 CS PP is a PVC-free, 60µ polypropylene non conformable film for flat sided applications only. Tech Spec: • 1D monomeric Tech Spec: • For SOLVENT, LATEX and AQUEOUS prints • External life of 2 years • Acrylic permanent adhesive • 100gsm backprinted kraft liner • Fire rated EN13501-1 and BS 476 Class 0 • Widths of 1370mm and 1600mm • Available in standard roll lengths of 50M and ‘buy the metre’ Tech Spec: • For SOLVENT, LATEX and AQUEOUS prints • External life of 2 years • Acrylic permanent adhesive • 100gsm backprinted kraft liner • Fire rated EN13501-1 • Widths of 1370mm and 1600mm • Available in standard roll lengths of 50M and ‘buy the metre’ Tech Spec: • For SOLVENT, LATEX and UV prints • External life of 3 years • Acrylic permanent adhesive • 100gsm backprinted kraft liner • Fire rated EN13501-1 • Width of 1370mm • Available in standard roll lengths of 50M and ‘buy the metre’ • Non PVC product MONOMERIC LAMINATES 134FINISHING MEDIA FLAT SURFACES MID-TERM LF 8700 CM-UV LF 8700 CM-UV is an 80µ mattmonomeric laminate with a 4 year outdoor life that works on all prints including UV. A matched laminate for the JT 8700 Series of print films. LF 8700 CG-UV LF 8700 CG-UV is an 80µ gloss monomeric laminate with a 4 year outdoor life that works on all prints including UV. A matched laminate for the JT 8700 Series of print films. Tech Spec: • For SOLVENT, LATEX, UV and AQUEOUS prints • External life of 4 years • Acrylic permanent adhesive • 100gsm backprinted kraft liner • Fire rated EN13501-1 and BS 476 Class 0 • Widths of 1370mm and 1524mm • Available in standard roll lengths of 50M and ‘buy the metre’ Tech Spec: • For SOLVENT, LATEX, UV and AQUEOUS prints • External life of 4 years • Acrylic permanent adhesive • 100gsm backprinted kraft liner • Fire rated EN13501-1 and BS 476 Class 0 • Widths of 1370mm and 1524mm • Available in standard roll lengths of 50M and ‘buy the metre’ 135FINISHING MEDIA FLAT SURFACES MID-TERM General Information: A range of monomeric pressure sensitive laminates to cover short to mid term flat-sided applications. These are the matched laminates for the MPI 3000 print vinyls. DOL 3460 GLOSS 80µ gloss monomeric laminate with a 2 year outdoor life. DOL 3480 MATT 80µ mattmonomeric laminate with a 2 year outdoor life. DOL 3470 LUSTRE 80µ lustre monomeric laminate with a 2 year outdoor life. General Information: Non PVC pressure sensitive laminate to cover short to mid term flat-sided applications. These are the matched laminates for the Nu-Print ‘O’ Series printable PP films. O21-P-P A 60µ gloss clear 4 year outdoor life fire rated polypropylene with a permanent UV laminating adhesive on a 140gsm neutral PE liner for short to mid term flat-sided applications. Tech Spec: • For SOLVENT, LATEX and AQUEOUS prints • 1D monomeric • External life of 2 years • Acrylic permanent adhesive • 95gsm backprinted kraft liner • Fire rated EN13501-1 • Available in standard roll lengths of 50M and ‘buy the metre’ Tech Spec: • Widths of 1370mm, 1600mm and 2000mm Tech Spec: • Widths of 1370mm and 1600mm Tech Spec: • Widths of 1370mm and 1600mm Tech Spec: • For SOLVENT, LATEX, UV and AQUEOUS prints • 1D polypropylene • External life of 4 years • Permanent clear UV polyacrylate adhesive • 140gsm backprinted PE coated liner • Fire rated EN13501-1 • Width of 1370mm • Available in standard roll lengths of 50M and ‘buy the metre’ • Made in the UK • Non PVC product DOL 3000 SERIES NU-FINISH ‘O’ SERIES 136General Information: A complete range of fire rated polymeric pressure sensitive laminates for applications to curved surfaces. Products with the ‘-UV’ suffix have improved adhesion to digital UV prints. LF 9500 CM-UV LF 9500 CM-UV is a 65µ mattpolymeric laminate with a 5 year outdoor life that works on all prints including UV. A matched laminate for the JT 9500 Series of print films. LF 9500 CG-UV LF 9500 CG-UV is a 65µ gloss polymeric laminate with a 5 year outdoor life that works on all prints including UV. A matched laminate for the JT 9500 Series of print films. LF 9700 CM-UV LF 9700 CM-UV is a fire rated, 80µ matt polymeric laminate with a 5 year outdoor life that works on all prints including UV. Mactac’s most UV resistant matt PVC laminate. A matched laminate for the JT 9700 Series of print films. LF 9700 CG-UV LF 9700 CG-UV is a fire rated, 80µ gloss polymeric laminate with a 5 year outdoor life that works on all prints including UV. Mactac’s most UV resistant gloss PVC laminate. A matched laminate for the JT 9700 Series of print films. Tech Spec: • 2D polymeric • External life of 5 years • Solvent permanent acrylic adhesive • 100gsm backprinted kraft liner • Fire rated EN13501-1 • Available in standard roll lengths of 50M and ‘buy the metre’ Tech Spec: • For SOLVENT, LATEX, UV and AQUEOUS prints • Widths of 1370mm and 1600mm Tech Spec: • For SOLVENT, LATEX, UV and AQUEOUS prints • Widths of 1370mm and 1600mm Tech Spec: • For SOLVENT, LATEX, UV and AQUEOUS prints • Widths of 1370mm and 1524mm Tech Spec: • For SOLVENT, LATEX, UV and AQUEOUS prints • Widths of 1370mm and 1524mm POLYMERIC LAMINATES FINISHING MEDIA CURVED SURFACES LONG TERM 137General Information: A range of polymeric pressure sensitive laminates to cover mid to long term curved applications. The DOL 2000 Series are the matched laminates for the MPI 2000 print vinyls. DOL 2460 GLOSS 80µ gloss polymeric laminate, DOL 2460 now has a 5 year outdoor life and a heavier and smoother liner. DOL 2480 MATT 80µ mattpolymeric laminate, DOL 2480 now has a 5 year outdoor life and a heavier and smoother liner. DOL 2470 LUSTRE 80µ lustre polymeric laminate, DOL 2470 now has a 5 year outdoor life and a heavier and smoother liner. Tech Spec: • For SOLVENT, LATEX and AQUEOUS prints • 2D polymeric • External life of 5 years • Acrylic permanent adhesive • Fire rated EN13501-1 • Available in standard roll lengths of 50M and ‘buy the metre‘ Tech Spec: • 135gsm backprinted kraft liner • Widths of 1370mm and 1600mm Tech Spec: • 135gsm backprinted kraft liner • Widths of 1370mm and 1600mm Tech Spec: • 135gsm backprinted kraft liner • Widths of 1370mm and 1520mm DOL 2000 SERIES FINISHING MEDIA CURVED SURFACES LONG TERM 138Next >