< PreviousGeneral Information: Cast pressure sensitive laminates from Fedrigoni, primarily for vehicle wrapping. C30 GLOSS C30 Gloss is a 30µ fully conformable clear gloss cast laminate, with a permanent adhesive for 3D wrapping and deep profiles. Its superior flexibility allows for application on rivets, concave and convex area surfaces. The permanent solvent-based adhesive adheres to vinyl printed with Solvent, Latex and UV inks. This is the recommended laminate for Fedrigoni’s C50 Ultimate Slide & Tack cast wrapping film. C30 MATT C30 Mattis a 30µ fully conformable clear mattcast laminate, with a permanent adhesive for 3D wrapping and deep profiles. Its superior flexibility allows for application on rivets, concave and convex area surfaces. The permanent solvent-based adhesive adheres to vinyl printed with Solvent, Latex and UV inks. This is the recommended laminate for Fedrigoni’s C50 Ultimate Slide & Tack cast wrapping film. Tech Spec: • For SOLVENT, LATEX and UV prints • 3D cast • External life of 6 years • Solvent permanent acrylic adhesive • 135gsm backprinted kraft liner • Widths of 1370mm and 1520mm • Available in standard roll lengths of 23M, 46M and ‘buy the metre’ CAST LAMINATES FINISHING MEDIA WRAPPING LONG TERM 139FINISHING MEDIA WRAPPING LONG TERM General Information: Cast pressure sensitive laminates from Avery Dennison, primarily for vehicle wrapping. DOL 1460 Z GLOSS DOL 1460 Z gloss has recently been upgraded to 6 years outdoors. A 30µ fully conformable gloss cast laminate, with a permanent adhesive for 3D wrapping and deep profiles. DOL 1460 Z can be used in combination with Avery Dennison MPI 1104 EA, MPI 1105 EA RS and MPI 1106 HT cast media. DOL 1480 Z MATT DOL 1480 Z matthas recently been upgraded to 6 years outdoors. A 30µ fully conformable mattcast laminate, with a permanent adhesive for 3D wrapping and deep profiles. DOL 1480 Z can be used in combination with Avery Dennison MPI 1104 EA, MPI 1105 EA RS and MPI 1106 HT cast media. SL 6560 HIGH GLOSS PU SL 6560 is a 38µ ultra high gloss polyurethane fully conformable laminate, with a permanent adhesive for 3D wrapping and deep profiles. To preserve the gloss level, SL 6560 comes with a protective film, which is removed after the lamination stage. The ideal high gloss laminate where a PVC free digital wrap is required. The matched and recommended print vinyl is Avery Dennison’s SP 1504 EA. Tech Spec: • For SOLVENT and LATEX prints • 3D cast • Solvent permanent acrylic adhesive • 130gsm backprinted kraft liner • Fire rated EN13501-1 • Available in standard roll lengths of 25M, 50M and ‘buy the metre’ Tech Spec: • External life of 6 years • Widths of 1370mm and 1520mm Tech Spec: • External life of 6 years • Widths of 1370mm and 1520mm Tech Spec: • 3D polyurethane • External life of 8 years • Width of 1370mm • Non PVC product CAST LAMINATES 140FINISHING MEDIA WRAPPING LONG TERM General Information: Cast pressure sensitive laminates from Mactac, primarily for vehicle wrapping. LF 10700 CG-UV LF 10700 CG-UV is a 30µ ultra clear gloss conformable cast PVC with a 4 year life. This 3D laminate was designed primarily for car wrapping. LF 10700 CG-UV is part of the LUV range of products which have been specifically designed for the protection of digital UV prints. It is also compatible with other standard digital printing techniques. A matched laminate for WW 100 PRO and JT 10700 WG-BFG-XR. LF 10700 CM-UV LF 10700 CM-UV is a 30µ ultra clear matt conformable cast PVC with a 4 year life. This 3D laminate was designed primarily for car wrapping. LF 10700 CM-UV is part of the LUV range of products which have been specifically designed for the protection of digital UV prints. It is also compatible with other standard digital printing techniques. A matched laminate for WW 100 PRO and JT 10700 WG-BFG-XR. Tech Spec: • For SOLVENT, LATEX and UV prints • External life of 4 years • 135gsm backprinted kraft liner • Fire rated EN13501-1 • Width of 1370mm • Available in standard roll lengths of 50M and ‘buy the metre’ CAST LAMINATES 141FINISHING MEDIA ANTI-GRAFFITI LAMINATES General Information: A pressure sensitive, 50µ easy to handle polypropylene laminating film. AGU-30 is our lowest cost anti-graffiti film and will help to protect your prints from damage by graffiti for up to 1 year outdoors. It is resistant to most common cleaning solvents and is only suitable for flat-sided applications on to printed materials, it is not suitable for protecting vinyl cut lettering. It can be used as a low cost dry-wipe laminate but inks may stain the surface, especially if repeatedly cleaned. For critical dry-wipe applications we would recommend T26-P. Due to the durability of the polymers used, graffiti can be easily removed with the help of common cleaning agents. It is the responsibility of the end user to test that their particular cleaning agent is compatible with the laminate. Tech Spec: • For SOLVENT, LATEX and UV prints • 1D polypropylene • External life of 1 year • Solvent permanent acrylic adhesive • 80gsm single-side PE coated liner • Widths of 1370mm and 1550mm • Available in standard roll lengths of 50M and ‘buy the metre’ • Non PVC product AGU-30 GLOSS 142General Information: A 36µ pressure sensitive gloss optically clear polyester fire rated anti-graffiti laminate on a 36µ clear polyester liner. LUV 7036 is suitable as a laminate across all print technologies including UV. With an outdoor life of up to 3 years, LUV 7036 high quality polyester can protect your prints against permanent damage from graffiti paints. Graffiti can be easily removed with the help of common solvents such as acetone, methanol etc. Due to the durability of the polymers used, graffiti can be easily removed with the help of common cleaning agents. It is the responsibility of the end user to test that their particular cleaning agent is compatible with the laminate. Tech Spec: • For SOLVENT, LATEX and UV prints • 1D polyester • External life of 3 years • Solvent permanent acrylic adhesive • Clear PET liner • Fire rated EN13501-1 • Widths of 1370mm and 1524mm • Available in standard roll lengths of 50M and ‘buy the metre’ • Non PVC product LUV 7036 GLOSS FINISHING MEDIA ANTI-GRAFFITI LAMINATES General Information: A 30µ pressure sensitive gloss clear polypropylene laminating film on a 36µ clear polyester liner that can be used as a dry-wipe film with appropriate marker pens, or as an internal low cost anti-graffiti film. Due to the durability of the polymers used, graffiti can be easily removed with the help of common cleaning agents. It is the responsibility of the end user to test that their particular cleaning agent is compatible with the laminate. Tech Spec: • For SOLVENT and LATEX prints • 1D polypropylene • Internal use only • Solvent permanent acrylic adhesive • Clear PET liner • Width of 1300mm • Available in standard roll lengths of 100M and ‘buy the metre’ • Non PVC product PG 7034 GLOSS 143General Information: Our most scratch and oil resistant laminate. T25-P-P ultra clear mattpolyester is a pressure sensitive laminate that does not dull down prints, leaving even dense black prints looking sharp and vibrant. It features a tough matthard coat that resists scratches and reduces fingerprinting. T25-P-P ultra clear mattpolyester has a permanent adhesive that works with all print technologies including UV. It is suitable for flat surfaces and is resistant to most common cleaning solvents. 30% UVa block. Due to the durability of the polymers used, graffiti can be easily removed with the help of common cleaning agents. It is the responsibility of the end user to test that their particular cleaning agent is compatible with the laminate. General Information: This satin clear 3 year pressure sensitive laminate will deter graffiti artists from vandalising your graphics. When the paint dries, areas can be easily scraped off with a plastic edged squeegee and any residue removed with proprietary graffiti remover. T27-P-P paint and scratch resist anti-graffiti polyester has a permanent adhesive that works with all print technologies including UV. It is suitable for flat surfaces and is resistant to most common cleaning solvents. 30% UVa block. Due to the durability of the polymers used, graffiti can be easily removed with the help of common cleaning agents. It is the responsibility of the end user to test that their particular cleaning agent is compatible with the laminate. Tech Spec: • For SOLVENT, LATEX and UV prints • 1D polyester • External life of 3 years • Permanent clear UV polyacrylate adhesive • 140gsm PE coated liner • Widths of 1370mm and 1530mm • Available in standard roll lengths of 25M, 50M and ‘buy the metre’ • Made in the UK • Non PVC product Tech Spec: • For SOLVENT, LATEX and UV prints • 1D polyester • External life of 3 years • Permanent clear UV polyacrylate adhesive • 140gsm PE coated liner • Width of 1370mm • Available in standard roll lengths of 25M, 50M and ‘buy the metre’ • Made in the UK • Non PVC product T25-P-P ULTRA CLEAR MATT T27-P-P SATIN FINISHING MEDIA ANTI-GRAFFITI LAMINATES 144General Information: A pressure sensitive, 3 year clear wipe- board film for write on/wipe-off and anti-graffiti applications. This 50µ gloss clear polyester film has been coated with a gloss varnish to make it easy to keep clean. It works with all dry-wipe pens we have tested, including: Staedtler, Pilot, Nobo, 5 Star Office and Universal Office Supplies range without leaving any trace of the ink on the surface when cleaned. For best results, the product should be applied dry using a laminator. The adhesive does not milk, so for smaller jobs it can be applied wet. 20% UVa block. Our closest competitors product takes more effort to wipe residual ink marks from the surface and still does not completely remove all of the residual markings; resulting in ghosted images and a build up of unwanted ink residues on the surface, especially when used over a period of time. Our specially treated surface provides a one wipe solution resulting in no ghosted images or ink residues left behind - the surface is completely clean again after only a few effortless wipes. After testing in-house we have found T26-P-P Gloss is a much more durable product producing a cleaner, quicker and longer lasting result. Tech Spec: • For SOLVENT, LATEX and UV prints • 1D polyester • External life of 3 years • Permanent clear UV polyacrylate adhesive • 140gsm PE coated liner • Widths of 1370mm and 1530mm • Available in standard roll lengths of 25M, 50M and ‘buy the metre’ • Made in the UK • Non PVC product T26-P-P GLOSS CLEAR FINISHING MEDIA DRY WIPE LAMINATES 145General Information: A pressure sensitive, 3 year gloss white wipe-board film for write on/wipe-off and anti-graffiti applications. This 150µ gloss polyester/PVC hybrid film has been coated with a gloss varnish to make it easy to keep clean. It works with all dry-wipe pens we have tested, including: Staedtler, Pilot, Nobo, 5 Star Office and Universal Office Supplies range without leaving any trace of the ink on the surface when cleaned. For best results, the product should be applied dry using a laminator. Our closest competitors product takes more effort to wipe residual ink marks from the surface and still does not completely remove all of the residual markings; resulting in ghosted images and a build up of unwanted ink residues on the surface, especially when used over a period of time. Our specially treated surface provides a one wipe solution resulting in no ghosted images or ink residues left behind - the surface is completely clean again after only a few effortless wipes. After testing in-house we have found T28-P-P Gloss White is a much more durable product producing a cleaner, quicker and longer lasting result. Tech Spec: • For SOLVENT, LATEX and UV prints • 1D polyester / PVC hybrid • External life of 3 years • Permanent clear UV polyacrylate adhesive • 140gsm PE coated liner • Widths of 1370mm and 1500mm • Available in standard roll lengths of 25M, 50M and ‘buy the metre’ • Made in the UK T28-P-P GLOSS WHITE FINISHING MEDIA DRY WIPE LAMINATES 146A complete range of laminates for all types of promotional floor graphics from 1-12 months internally and up to 6 months externally. All are rated for this application, generally using the DIN 51130:2004-6 standard for shod feet or the harmonised European standard EN-13036-4:2011 which uses the Pendulum test to assess the floor’s surface properties under both wet and dry conditions. For a more detailed explanation of floor slip ratings please refer to the technical information section of our website: INTRODUCTION Buy The MetreBuy The Metre Non-standard roll lengths are surcharged at 33% FINISHING MEDIA FLOOR LAMINATES Floor Rating Summary 147FINISHING MEDIA FLOOR LAMINATES General Information: Primarily for the protection of floor graphics. GUARDIAN Prop12 is a non-PVC grain textured 165µ polypropylene film that has achieved a wet Pendulum Test Value of 52 which is the equivalent of an R12 rating for slip resistance. The dry PTV is very high at 85. The HSE rates this as a low slip potential with a slip probability of less than 1 in 1,000,000. A copy of the test certificate is available on request. Prop12 blocks out 20% of UV light and the 165µ textured PVC face film is colour neutral so will not significantly alter the shades of the print being laminated. Prop12 is suitable for internal applications and has a service life of around 3 months, dependent on the amount of traffic involved. The product can also be used as a scuff resistant laminate for printed wall graphics. Rolls are wound liner side out. Tech Spec: • For SOLVENT, LATEX, UV and AQUEOUS prints • Internal life of 3 months for floors and 3 years for walls • Acrylic permanent adhesive • 65gsm glassine liner • Self-extinguishing • Width of 1300mm • Available in standard roll lengths of 10M, 50M and ‘buy the metre’ • DIN 51130 slip rated R12 • Non PVC product GUARDIAN PROP12 148Next >