Search Results for: floor laminate

NU-COAT FlooR10 M73-P

Fire rated, 100µ textured laminating PVC film for internal applications with a service life of around 3 months dependent on traffic, also slip rated to DIN EN 13036-4 and is borderline for external use. For lamination over Solvent, Latex and UV inks. Slip rated to DIN 51130 anti-slip group R10. Suitable for both wall and floor applications.

NU-COAT FlooR11 M77-P

190µ textured laminating PVC film suitable for both internal and external applications with a service life of around 6 months internally and 3 months externally. For lamination over Solvent, Latex and UV inks. Slip rated to DIN EN 13036-4 equivalent to an R11 rating.

Mactac FloorGrip

150µ matt structured polymeric PVC film - Our most durable laminate for internal floor graphics with an expected outdoor life of 3 months when used with Mactac's StreetRap print media and the finished product conforms well to exterior uneven surfaces such as concrete pavement and bitumen. For lamination over Solvent, Latex and UV inks. Slip rated R11. Fire rated BS476 Class 0 & EN13501.

DigiGUARD Floortex FV8-85

200µ textured PVC face film primarily for the protection of internal floor graphics with a service life of around 6 months. For lamination over Solvent, Latex and UV inks. Slip rated R11, so it can be used in all public places including stairwells and the like. B1 fire rated.

Mactac LUV 6300

125µ grain textured semi-matt PVC laminate specially designed to protect indoor floor graphics for up to 6 months. Helps eliminate glare while providing a sophisticated look for promotions and advertising. For lamination over Solvent, Latex and UV inks. Slip rated R9. Fire rated EN13501-1.

Mactac LUV 6301

100µ matt grain textured PVC laminate for protection of floor graphics up to 3 months internally. For lamination over Solvent, Latex and UV inks. Slip rated R9, DIN EN 13036-4 and approved to ASTM Friction Test C-1028-2007. Fire rated EN13501-1.

Mactac JT 8300 WM-RT Dot Floors

200µ matt white vinyl for 'one-part' printed floor graphics (does not need lamination) for Solvent, Latex and UV inks. Mactac's 'Dot' adhesive allows for easy installation without using specialist tools or water. 1 month indoor life for pedestrian traffic and slip rated with a Pendulum Test Value of greater than 36, which is low slip potential.

DigiGUARD GUARDIAN Prop12

Primarily for the protection of floor graphics but also used for wall applications, a non-PVC, PP (polypropylene) laminate with a wet PTV of 52 which is the equivalent of an R12 rating for slip resistance.

Mactac StreetLam

385µ satin clear construction made from abrasive particles which are bonded to a polymeric PVC and uses a high tack adhesive with 6 months external life. For lamination over Solvent, Latex and UV inks. Slip rated R12, this is our highest rated anti-slip floor laminate. Fire rated EN13501.

M16-M-P

Matt white high opacity, fire rated, 80µ monomeric with MaxGRAB permanent adhesive on a PE liner. Our tackiest and strongest adhesive for the widest range of difficult applications - this print vinyl is for more demanding applications onto rougher external surfaces. For flooring applications the durability is 3 to 6 months and is only slip-resistant when overlaminated with a suitable slip-rated external floor laminate. Made in the UK.

M15-M-P

Matt white, fire rated, 80µ monomeric with MaxGRAB permanent adhesive on a PE liner. Our tackiest and strongest adhesive for the widest range of difficult applications - this print vinyl is for more demanding applications onto rougher external surfaces. For flooring applications the durability is 3 to 6 months and is only slip-resistant when overlaminated with a suitable slip-rated external floor laminate. Made in the UK.

Mactac StreetRap

85µ white matt vinyl with a very aggressive permanent adhesive. Designed for application to slightly rough pedestrian surfaces like concrete and asphalt with an outdoor life of 3-6 months when laminated with FloorGrip or StreetLam respectively.

DigiGUARD Laminates for UV

The best laminates for UV prints in our range! These print laminates can be used universally over all printing inks. Most of the films are Class 0 fire rated. 3-5 year outdoor life, colour neutral, 80µ PVC pressure sensitive laminating films with a photograde clear adhesive that guarantees a high bond with minimal silvering and bridging around heavily UV inked areas.

M25-P-K

Matt clear, fire rated, 80µ transparent monomeric print vinyl that can also be used as a matched matt laminate, with a clear PermPLUS permanent adhesive on a kraft liner.

DigiGUARD GUARDIAN Non-PVC Laminates

Matt & Gloss non-PVC print laminates engineered from 60µ polypropylene for short-term use. Suitable for laminating over Solvent, Latex, UV and Aqueous inks.

DigiGUARD MU4 Matt UV Laminate

Matt, 100µ PVC laminate suitable for all inks, including UV.

Mactac LF 10700 CG-UV

Fire rated, 30µ ultra gloss clear, conformable cast PVC laminate designed primarily for car wrapping and for the protection of digital UV and standard digital prints. External life of 4 years.

LF 9700 CM-UV

Matt clear, fire rated, 80µ print laminate with a 5 year outdoor life - Mactac's most UV resistant matt PVC laminate. Works on all prints including UV.

DigiGUARD GU4 Gloss UV Laminate

Gloss, 80µ PVC laminate suitable for all inks, including UV.

Fedrigoni C30 Gloss

30µ gloss clear, fully conformable cast PVC, full wrapping laminate with a permanent adhesive. External life of 6 years. C30 Gloss laminate is for use in combination with Fedrigoni's C50 Ultimate cast print wrap film.

Avery Dennison DOL 1460 Z Gloss

30µ gloss clear, fully conformable cast PVC wrapping laminate with a permanent adhesive. External life of 6 years. DOL 1460 Z can be used in combination with Avery Dennison's MPI 1104 EA, MPI 1105 EA RS and MPI 1106 HT cast media.

Avery Dennison DOL 1480 Z Matt

30µ matt clear, fully conformable cast PVC laminate with a permanent adhesive. External life of 6 years. DOL 1480 Z can be used in combination with Avery Dennison's MPI 1104 EA, MPI 1105 EA RS and MPI 1106 HT cast media.

LF 8500 CG

Gloss clear, 70µ PVC print laminate with a 2 year outdoor life - Mactac's most economical gloss laminate.

Avery Dennison DOL 2460 Gloss

Gloss clear, 80µ polymeric print laminate to cover Solvent, Latex and Aqueous inks. Permanent adhesive, 135gsm backprinted kraft liner and 5 year outdoor life. Fire rated.

LF 9700 CG-UV

Gloss clear, fire rated, 80µ print laminate with a 5 year outdoor life - Mactac's most UV resistant gloss PVC laminate. Works on all prints including UV.

Mactac Print Laminates – Monomeric Films

A complete range of fire rated, 70µ-80µ monomeric PVC pressure sensitive laminates that cover short to mid term flat-sided applications. Additionally, LF 8510 CS PP provides a PVC-free option. For Solvent, Latex and Aqueous inks, additionally products with 'UV' have improved adhesion for digital UV prints.

LF 8700 CG-UV

Gloss clear, 80µ print laminate with a 4 year outdoor life - works on all prints including UV.

Mactac LF 10700 CM-UV

Fire rated, 30µ ultra matt clear, conformable cast PVC laminate designed primarily for car wrapping and for the protection of digital UV and standard digital prints. External life of 4 years.

DigiGUARD SU3-70 Semi-matt

Semi-matt, 80µ PVC laminate for UV prints.

DigiGUARD GU3-70 Ultra Gloss

Ultra glossy, 80µ PVC laminate for UV prints.

LF 8700 CM-UV

Matt clear, 80µ print laminate with a 4 year outdoor life - works on all prints including UV.

LF 8510 CS PP

60µ satin clear PVC-free print laminate. A polypropylene non-conformable film for flat-sided applications only.

LF 9500 CG-UV

Gloss clear, 65µ print laminate with a 5 year outdoor life. Laminating film for Solvent, Latex, UV and Aqueous inks.

LF 9500 CM-UV

Matt clear, 65µ print laminate with a 5 year outdoor life. Laminating film for Solvent, Latex, UV and Aqueous inks.

Mactac Polymeric Laminates

A complete range of fire rated, polymeric pressure sensitive laminates that cover applications on curved surfaces. For lamination over Solvent, Latex, UV and Aqueous inks.

Avery Dennison DOL 3470 Lustre

Lustre clear, 80µ print laminate with a 2 year outdoor life.

Avery Dennison DOL 2470 Lustre

Lustre clear, 80µ polymeric print laminate to cover Solvent, Latex and Aqueous inks. Permanent adhesive, 135gsm backprinted kraft liner and 5 year outdoor life. Fire rated.

Avery Dennison DOL 2480 Matt

Matt clear, 80µ polymeric print laminate to cover Solvent, Latex and Aqueous inks. Permanent adhesive, 135gsm backprinted kraft liner and 5 year outdoor life. Fire rated.

Avery Dennison DOL 3460 Gloss

Gloss clear, 80µ print laminate with a 2 year outdoor life.

Avery Dennison DOL 3480 Matt

Matt clear, 80µ print laminate with a 2 year outdoor life.

Fedrigoni C30 Matt

30µ matt clear, fully conformable cast PVC, full wrapping laminate with a permanent adhesive. External life of 6 years. C30 Matt laminate is for use in combination with Fedrigoni's C50 Ultimate cast print wrap film.

Avery Dennison DOL 2000 Series

A range of fire rated, polymeric pressure sensitive laminates to cover mid to long term curved applications, these are the matched laminates for the MPI 2000 print vinyls.

DigiGUARD GUARDIAN Lam Gloss

A gloss, 60µ non-PVC print laminate for most print technologies including UV.

Avery Dennison SL 6560 High Gloss PU

38µ ultra high gloss polyurethane fully conformable laminate, with a permanent adhesive for 3D wrapping and deep profiles. The matched and recommended laminate for Avery Dennison's SP 1504 EA.

LF 8500 CM

Matt clear, 70µ PVC print laminate with a 2 year outdoor life - Mactac's most economical matt laminate.

NU-COAT T25-P-P Ultra Clear Matt

50µ ultra clear matt anti-graffiti film - our most scratch and oil resistant laminate. 3 year outdoor life. For lamination over Solvent, Latex and UV printing inks. Non-PVC product. Made in the UK.

DigiGUARD GUARDIAN Lam Matt

A matt, 60µ non-PVC print laminate for most print technologies including UV.

DigiGUARD TU3-70 Matt Textured

Matt textured scratch resist, 80µ PVC laminate for UV prints.

Mactac LUV 7036 Gloss

36µ gloss optically clear, high quality polyester, this fire rated anti-graffiti film has a 3 year external life and can protect prints against permanent damage from graffiti paints. For lamination over Solvent, Latex and UV printing inks. Non-PVC product.

Nu-Finish ‘O’ Series

Non-PVC 60µ fire rated polypropylene, pressure sensitive print laminates for use over Solvent, Latex, UV and Aqueous inks, to cover short to mid term flat-sided applications. These are the matched laminates for the Nu-Print 'O' Series printable PP films. Made in the UK.

Avery Dennison DOL 3000 Series

A range of monomeric pressure sensitive laminates for use over Solvent, Latex and Aqueous inks, covering short to mid term flat-sided applications. The matched laminates for the MPI 3000 print vinyls.

NU-COAT Scenic Wall Series

A robust, durable and long lasting range of wall decoration products for the internal decoration of buildings. These printable wallcovering products feature VOC free adhesives making them ideal for large internal graphics. The 'Scenic Wall' range consists of two print films and two matched matt laminates.

M21-P-K

Gloss clear, fire rated, 80µ transparent monomeric print vinyl that can also be used as a matched gloss laminate, with a PermPLUS permanent adhesive on a kraft liner.

NU-COAT T27-P-P Satin

50µ satin clear anti-graffiti laminate that will deter graffiti artists from vandalising your graphics. A paint and scratch resist anti-graffiti film with a 3 year outdoor life. For lamination over Solvent, Latex and UV printing inks. Non-PVC product. Made in the UK.

DigiPRINT EF500

The smoothest of our laminated scrim banners, EF500 is a 500gsm economy smooth matt medium strength frontlit scrim PVC banner available in a nice neutral white shade. For printing with Solvent, Latex and UV inks.

M16-H-P

High-opacity matt white, fire rated, 80µ coverall monomeric print vinyl with a clear HighGRAB permanent adhesive on a PE coated liner. Suitable for graphic applications onto a wider range of difficult surfaces.

DigiGUARD AGU-30 Gloss

50µ gloss clear, easy to handle polypropylene laminating film that also works on UV prints, and our lowest cost anti-graffiti film protecting prints from graffiti damage for up to 1 year outdoors. For lamination over Solvent, Latex and UV printing inks. Non-PVC product.

Mactac JT 9500 and JT 9700 Polymeric Series

High quality and fire rated polymeric vinyls from Mactac, with solvent based adhesives and a choice of recommended laminates.

O13-H-P

Satin white, 60µ non-PVC polypropylene film with a HighGRAB permanent adhesive on a 140gsm PE coated liner. A fire rated, 4 year external self-adhesive print film for Latex and UV printing inks.

M16-H-X

High-opacity matt white, fire rated, 80µ coverall monomeric with airXit clear HighGRAB permanent adhesive for faster sign applications with no trapped air bubbles. Suitable for application onto a wider range of difficult surfaces.

O21-P-P

Gloss clear, 60µ non-PVC print laminate for use over Solvent, Latex, UV and Aqueous inks, to cover short to mid term flat-sided applications. 4 year outdoor life. Fire rated EN13501-1.

NU-COAT T26-P-P Gloss Clear

50µ gloss clear dry-wipe laminate for creation of write-on/wipe-off wipeboards as well as anti-graffiti applications. The specially treated surface provides a one wipe solution resulting in no ghosted images or ink residues left behind - the surface is completely clean again after only a few effortless wipes! For lamination over Solvent, Latex and UV printing inks. Non-PVC product. Made in the UK.

P21-P-K

Clear gloss, fire rated, 75µ transparent polymeric with a clear PermPLUS permanent adhesive on a kraft liner - a printable film that can also be used as a matched gloss laminate.

DigiPRINT GUARDIAN Print

A 60µ, fire rated matt white non-PVC print film for Latex and UV inks with a grey opaque removable adhesive. 100% Chlorine free and Phthalate free.

DigiPRINT GUARDIAN Print AF

A 60µ, fire rated matt white non-PVC print film for Latex and UV inks with an easy apply, air-free, grey opaque removable adhesive. 100% Chlorine free and Phthalate free.

DigiPRINT EF440

A 440gsm economy smooth matt scrim PVC banner, this is a medium strength laminated frontlit scrim banner available in a bright white finish. For printing with Solvent, Latex and UV inks.

Mactac PG 7034 Gloss

30µ gloss clear polypropylene film on a 36µ clear polyester liner that can be used as dry-wipe film with appropriate marker pens, or as an internal low cost anti-graffiti film. For lamination over Solvent and Latex printing inks. Non-PVC product.

NU-COAT Nu-Print ‘M’ Series Monomeric Print Vinyls – 5. MaxGRAB (M) Adhesives

Monomeric fire rated print vinyls with MaxGRAB (M) max grab permanent clear UV polyacrylate adhesives. Matt white face films with our tackiest and strongest adhesive for the widest range of difficult applications and the most demanding short-term applications on rougher surfaces. Made in the UK.

P12-H-P

High-opacity gloss white, fire rated, 75µ coverall polymeric with a clear 'high grab' permanent adhesive on a PE coated liner. The HighGRAB (H) adhesive suits a wider range of difficult surfaces such as smooth and lightly textured walls, floors, ceramic tiles, MDF, wood, plasterboard etc. Also smooth low-surface energy surfaces such as PP etc.

P12-H-K

High-opacity gloss white, fire rated, 75µ coverall polymeric with a clear 'high grab' permanent adhesive on a kraft liner. The HighGRAB (H) adhesive suits a wider range of difficult surfaces such as smooth and lightly textured walls, floors, ceramic tiles, MDF, wood, plasterboard etc. Also smooth low-surface energy surfaces such as PP etc.

P12-H-X

High-opacity, fire rated, gloss white, 75µ coverall polymeric print vinyl with a clear HighGRAB permanent adhesive for a wider range of difficult surfaces such as smooth and lightly textured walls, floors, ceramic tiles, MDF, wood, plasterboard etc. coupled with an airXit adhesive that helps to eliminate air bubbles and speed up application times.

M16-H-K

High-opacity matt white, fire rated, 80µ coverall monomeric print vinyl with a clear HighGRAB permanent adhesive on a kraft liner. Suitable for graphic applications onto a wider range of difficult surfaces.

DigiPRINT DP4 Series

SPECIAL OFFER - Order 4 rolls and get an extra 5% discount! Our most competitively priced range of monomeric print vinyl's. White Gloss or Matt, 4 year external, 95µ PVC face films with an acrylic permanent grey opaque adhesive.

DigiPRINT TSTC8

Optically clear gloss unsupported polyester film primarily for window graphics with superb clarity and tear resistance. A 190µ, non-PVC film capable of taking lots of ink - it is also ideal for creating film positives and the like.

M21-U-K

Gloss clear, fire rated, 80µ monomeric print vinyl with UltraGRAB permanent adhesive on a kraft liner. Our strongest adhesive for the widest range of difficult surfaces, including extreme applications such as low-surface energy plastics. Adheres well at lower application temperatures and builds bond strength quickly.

M11-H-K

Gloss white, fire rated, 80µ monomeric print vinyl with a clear HighGRAB permanent adhesive on a kraft liner. The better than standard, high-grab permanent adhesive is suitable for application to a wider range of difficult surfaces.

M12-H-K

High-opacity gloss white, fire rated, 80µ coverall monomeric print vinyl with clear HighGRAB permanent adhesive on a kraft liner. The HighGRAB adhesive is better than standard permanent adhesives and suitable for graphic applications onto a wider range of difficult surfaces.

M12-H-X

High-opacity gloss white, fire rated, 80µ coverall monomeric print vinyl with HighGRAB airXit clear permanent adhesive for faster sign applications with no trapped air bubbles. Suitable for application onto a wider range of difficult surfaces.

M15-H-K

Matt white, fire rated, 80µ monomeric print vinyl with a clear HighGRAB permanent adhesive on a kraft liner. The better than standard permanent adhesive is suitable for a wider range of difficult application surfaces.

M16-U-K

High-opacity matt white, fire rated, 80µ coverall monomeric with UltraGRAB permanent adhesive on a kraft liner. Our strongest adhesive for the widest range of difficult surfaces - adheres well at lower application temperatures and builds bond strength quickly.

M12-U-K

High-opacity gloss white, fire rated, 80µ coverall monomeric print vinyl with a clear UltraGRAB permanent adhesive on a kraft liner. Our strongest adhesive for the widest range of difficult surfaces - adheres well at lower application temperatures and builds bond strength quickly.

Keder Lip PVC Self-Adhesive Tape

High-quality flat Keder clear PVC tape laminated with a premium pressure sensitive adhesive.

P21-P-P

Clear gloss, fire rated, 75µ transparent polymeric with a clear PermPLUS permanent adhesive on a PE coated liner - a printable film that can also be used as a matched gloss laminate.

Fedrigoni C50 Ultimate

A white gloss, 50µ highly conformable cast print wrap vinyl for Solvent, Latex and UV printing. Micro-textured bubble-free, grey opaque permanent adhesive with low initial tack and excellent repositionability for smooth, fast application results. Our most competitive and easiest to apply digital cast wrap film.

Mactac JT 10700 WG-BFG-XR

A white gloss, 50µ highly conformable cast print wrap vinyl for Solvent, Latex and UV printing. Micro-textured bubble-free, grey opaque permanent adhesive with low initial tack and extreme repositionability for smooth, fast application results.

Avery Dennison SP 1504 EA

A non-PVC 60µ gloss white, opaque, 3D conformable print wrap film for Solvent, Latex and UV printing with a low initial tack and highly repositionable permanent, grey acrylic based adhesive.

P25-P-P

Clear matt, fire rated, 75µ transparent polymeric with a clear PermPLUS permanent adhesive on a PE coated liner - a printable film that can also be used as a matched matt laminate.

P25-P-K

Clear matt, fire rated, 75µ transparent polymeric with a clear PermPLUS permanent adhesive on a kraft liner - a printable film that can also be used as a matched matt laminate.

Avery Dennison MPI 3000 High Opacity (HOP) Monomeric Series

The MPI 3000 HOP monomeric range of fire rated print vinyls feature high opacity monomeric PVC face films with acrylic permanent and acrylic removable adhesives. The high opacity face film, with opacity at over 99%, means that traditional grey opaque adhesives are not required!